NEC VT45 user manual Wiring Diagram, E-17

Wiring Diagram

Speaker System

Macintosh or Compatibles (Desktop type or notebook type)

	AUDIO			PC
S-VIDEO			RGB OUT	CONTROL
IN	L/MONO	OUT
	IN
VIDEO
IN	R IN	IN	RGB IN
					IBM VGA or Compatibles
					(Desktop type or notebook type)
				Signal cable (supplied)
Document Camera				To mini D-Sub 15-pin connector on
				the projector. It is recommended
				that you use a commercially
				available distribution amplifier if
				connecting a signal cable longer
				than the supplied cable.
					DVD Player (with component output)
				Monitor	Optional Component V cable
VCR, DVD Player or LaserDisc Player

To video, S-video, and audio inputs on the projector.

NOTE: When using with a notebook PC, be sure to connect between the projector and the note- book PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.

NOTE:

*If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver or power management software.

*If you accidentally hit the POWER button on the remote control, wait 60 seconds and then press the POWER button again to resume.

NOTE: If using video, S-video, or audio cables, the cables should be 3 m (9.8 feet) or shorter.

E–17