[Page 3] (Advanced mode)
Setup
Page1 | Page2 | Page3 | Page4 |
Auto Adjust |
| On | Off |
Auto Start |
| On | Off |
|
|
| |
Power Management | On | Off | |
Power Off Confirmation | On | Off | |
Keystone Save |
| On | Off |
Fan High Speed Mode | On | Off | |
[Page 4] (Advanced mode)
Setup
Page1 | Page2 | Page3 | Page4 |
Default Source Select | Select |
| |
Default Source | RGB |
| |
Communication Speed | 19200bds |
| |
Control Panel Key Lock | Unlock |
| |
Clear Lamp Hour Meter |
|
| |
Clear Filter Usage |
|
| |
<Auto Adjust>
When “Auto Adjust” is set to “On”, the projector automati- cally determines the best resolution for the current RGB in- put signal to project an image using NEC’s Advanced AccuBlend Intelligent Pixel Blending Technology.
The image can be automatically adjusted for geometry and stability; “Horizontal Position”, “Vertical Position”, “Clock” and “Phase”.
On: | Automatically adjusts image “Horizontal |
| Position”, “Vertical Position”, “Clock” and |
| “Phase”. |
Off: | User can adjust the image display functions |
| (“Horizontal Position”, “Vertical Position”, |
| “Clock” and “Phase”) manually. |
<Auto Start>
Turns the projector on automatically when the power cable is inserted into an active power outlet and the main power switch is on. This eliminates the need to always use the “Power” button on the remote control or projector cabinet.
<Power Management>
When this option is on and there is no RGB input for five minutes or more, the projector will automatically turn itself off.
NOTE:This feature does not work with Video or
<Power Off Confirmation>
This option determines whether a confirmation dialog for turning off the projector will appear or not.
<Keystone Save>
This option enables you to save your current keystone set- tings. Saving your change once affects all sources. The changes are saved when the projector is off.
<Fan High Speed Mode>
This option allows you to select two modes for fan speed:
When you wish to cool down the temperature inside the pro- jector, select the
<Default Source Select>
You can set the projector to default to any one of its inputs each time the projector is turned on.
Last: | Sets the projector to default to the previous |
| or last active input each time the projector |
| is turned on. |
Auto: | Searches for an active source in order of |
| RGB → Video → |
| first found source. |
Select: | Displays the selected source input every |
| time the projector is started up. Select an |
| input from the |
<Communication Speed>
This feature sets the baud rate of the PC Control port (Mini DIN 8 Pin).
it supports data rates from 4800 to 19200 bps.
The default is 19200 bps. Select the appropriate baud rate for your equipment to be connected.
Setup
Page1 | Page2 | Page3 | Page4 |
Default Source Select | Select |
| |
Default Source | RGB |
| |
Communication Speed | 19200bds |
| |
Control Panel Key Lock | Unlock |
| |
Clear Lamp Hour Meter |
|
| |
Clear Filter Usage |
|
| |
<Conrol Panel Key Lock>
This option turns on or off the Control Panel Key Lock func- tion.
NOTE:
•When the cabinet buttons are not locked, “Control Panel Key Lock - Unlock” will be displayed. When the cabinet buttons are locked, “Control Panel Key Lock - Lock” will be displayed.
•This Control Panel Key Lock does not affect the remote control and the PC Control functions.
