NetComm Gateway Series manual Setting Dynamic IP Dhcp

Setting Dynamic IP (DHCP)

Click “DHCP” to obtain a Dynamic IP address, and then click the “Accept” button at the bottom of the screen.

To save the settings click System Operation to select “Save Settings”, “Restart”, and then click the ”Accept” button. Wait for a while (about 40 seconds), and the system will obtain the related IP value from the DHCP Server.

NOTE: After the system has obtained a new IP address, if using WAN Port to enter the Web Configuration Screen, a new IP address has to be used. The same applies to the following two settings.

Setting Static IP

Select “Static IP” and enter the IP address, Subnet Mask and Default Gateway values. Then click the “Accept” button at the bottom of the screen.

Save the settings, and then restart the system. Wait for about 40 seconds for the system to restart.

ADSL PPPoE Settings

Select “PPPoE” and enter the Account Number, Password and re-enter Password to confirm. Then click the “Accept” button at the bottom.

Save the settings, and then restart the system. The system will take about 40 seconds to restart.

SmartVoice Gateway(s) User Guide	1
YML832 Rev2