4.Configuring the Gateway via IVR

Preparation

Install the Gateway according to the instructions as described in Chapter 2.

If a static IP is used, confirm the desired IP settings of the WAN Port (IP address, Subnet Mask, and Default gateway). Please contact your local Internet Service Provider (ISP) if you have any questions.

If using dialup ADSL (PPPoE) for network connection, confirm your broadband account name and password.

If users wish to build a Gateway under the NAT, Gateway WAN Port IP address and LAN Port should not use the same range. This is to avoid phone failures.

Configuration Methods

The gateway provides two configuration options:

1)Web Interface

2)Telephone IVR (Interactive Voice Response)

The IVR provides basic query and configuration, while the Web interface provides a full configuration.

SmartVoice Gateway(s) User Guide

75

YML832 Rev2

 

Page 75
Image 75
NetComm Gateway Series manual Configuring the Gateway via IVR, Preparation, Configuration Methods