NetComm Gateway Series manual Direct Connection to Pstn, Requirements

Direct Connection to PSTN

Note:	The above diagrams show a 4-port SmartVoice gateway for illustration purposes.
	An 8 port SmartVoice gateway could also be used depending upon your network
	requirements.

•Connect one of the trunk lines to the Gateway FXO Port.

•The line of “Dial Number” (36008913) must be on-hook.

•Detect Channel: Enter 3 (if the trunk line is connected to P3, and uses P3 for outgoing detection).

•Phone Number: Enter the number of the FXO line.

•Dial Number: Enter the number of the end to be tested—36008913.

•CPT group: Enter the group to save your settings to once the test has been completed.

•Finally, click the “Accept” button.

Detection in Progress: during detection, the following windows will appear.

52	SmartVoice Gateway(s) User Guide
	YML832 Rev2