NetComm Gateway Series manual Calling Features, Calling Feature Instructions

Calling Features

•Do Not Disturb: It will only be able to call out when it is enabled. All incoming calls will be restricted.

•Unconditional Forward: All incoming calls will be forwarded to the “Forwarding Number” automatically. If it forwards to FXO, it only make FXO hook off, not make FXO dial out.

•Busy Forward: Forward the incoming call to “Forwarding Number” when the port is busy.

•No Answer Forward: Forward the incoming call to “Forwarding Number” after ring timeout expires without answer.

•Call Hold: Enable the call hold feature on the specific FXS port.

NOTE: Call Hold must be checked; Call Transfer or Call Waiting is active.

•Call Transfer: Enable the call transfer feature on the specific FXS port.

•Call Waiting: Enable the call waiting feature on the specific FXS port.

Calling Feature Instructions:

•Call Hold: Call will be put on hold after FLASH button pressed on the phone set. The gateway will play on-hold music, which is provided by your VoIP network, to the remote end.

•Call Transfer: Call will be put on hold after FLASH button pressed on local phone set (gateway plays on-hold music to the remote end). Meanwhile, the local user can dial out to another number after dial tone is observed. After the handset is replaced back on-hook, the call on hold will then be transferred to the new call regardless of the status of the new call. If the wrong number is dialed for the new call, just press the FLASH button to get back the call on hold. In another case, if the local user doesn’t hang up the phone after the new call is set up, press the FLASH button to switch between the first call and the new call. Please be informed that the PBX between phone sets and the gateway must support FLASH features in order to use this function. If a phone set is connecting directly to the FXS port of the gateway and not functioning to FLASH, please adjust the settings in “Flash Detect Time” in “Advanced Options” section.

NOTE: The availability of the above features also depends on your VoIP network. Please also check with your service provider on these services.

36	SmartVoice Gateway(s) User Guide
	YML832 Rev2