Overview
8.Click the Configure My Router button and follow the
9.When prompted you should power off your router and then power it back on again. You can close Easy Config at this point by clicking the Exit button.
Note: It may also be beneficial to reboot your computer but this is usually not required.
10.Once your NB1300Plus4 has booted (RDY light pulses) wait one minute and you should now be able to connect to the Internet. You can run Easy Config again just to check your connection status.
www.netcomm.com.au | Rev. 1- YML674 |
Page 10 | NB1300Plus4 ADSL Modem |
