NetComm NB1300PLUS4 manual Adsl Configuration

ADSL Configuration

The ADSL Configuration page allows the user to set the configuration for ADSL protocols.

Trellis: This field allows the user to enable or disable the Trellis Code. By default, it is always enabled.

Handshake Protocol: This field allows the user to select the ADSL handshake protocol.

Wiring Selection: This field allows the user to enter the wiring selection for the RJ-11. Tip/Rip is the default for the board without the inner/outer pair relay

Bit Swapping: This field allows the user to enable or disable the upstream bit swapping.

Advanced

Rev. 1 - YML674	www.netcomm.com.au
NB1300Plus4 ADSL Modem	Page 53