NetComm NB1300PLUS4 manual Adsl Router, Configuring your Computer to use the NB1300Plus4

Models: NB1300PLUS4

1 92
Download 92 pages 24.58 Kb
Page 26
Image 26

 

Field

Setting Details

 

 

 

 

Service name:

Any name to describe your ISP

 

User Name:

Your ISP will provide a case sensitive User Name in a

 

 

format similar to your email address. Contact your ISP

 

 

for details

 

Password:

Enter your Password as supplied by your Service

 

 

Provider (characters are usually all lower case)

 

Disconnect timeout:

0

 

Mode/Wan Connection Type:

PPPoE LLC or PPPoA (Your ISP should advise which

 

 

WAN Type)

Gateway Ethernet-

VPI:

8

 

 

VCI:

35

 

 

 

 

 

Static IPAddress:

192.168.241.101

 

 

 

ADSL Router

Subnet Mask:

255.255.255.0

 

 

Default Gateway:

0.0.0.0

 

 

 

 

 

Bridge mode:

Disabled

 

 

 

Default Setting. Although in most cases you will not be required to alter these default settings for your NB1300Plus4, your ISP may identify specific settings to enable connection to their service. Please refer to your ISP or Network Administrator for further information.

d.Click Submit and then click the Save Setting and Reboot button from the bottom of the menu. Wait for the configuration to complete.

Standard configuration of your NetComm NB1300Plus4 ADSL Modem is now complete. You should be able to access the Internet through the unit, when it is set to be your gateway on your computer/s. Refer to Step 3 for more information.

Step 3: Configuring your Computer to use the NB1300Plus4

To use the NB1300Plus4 ADSL Modem to access the Internet, your computer must have an IP Address that is in the same LAN subnet as the NB1300Plus4 ADSL Router and use the NB1300Plus4 ADSL Router’s IP address as its gateway.

Most applications call for the Primary and Secondary DNS server entries to be made on each computer. These can be automatically assigned by another DHCP server or by enabling the DHCP server on the NB1300Plus4 ADSL Modem, and entering the DNS values in the DNS section of the NB1300Plus4.

The following example shows how a computer could be set up when the NB1300Plus4 ADSL Modem is configured with no DHCP service for this example. The NB1300Plus4 ADSL Modem would be set to a LAN IP Address (Gateway) of 192.168.1.1 with a Subnet Mask of 255.255.255.0

www.netcomm.com.au

Rev. 1- YML674

Page 26

NB1300Plus4 ADSL Modem

Page 26
Image 26
NetComm NB1300PLUS4 manual Adsl Router, Configuring your Computer to use the NB1300Plus4