ADSL Modem - Ethernet Configuration
Use this configuration if you:
■Have been told to use the “ADSL Modem” Easy Config Profile, or
■Want to connect this device to another router, or
■Want to use your ISP’s software to log on to the Internet directly (not sharing) and your computer will use a Public IP address, and
■DO NOT need the NB1300Plus4 to share your Internet service ( You can still use windows ICS to share your Internet Service), and
■Do not require your computer to be protected (via NAT) from the Internet, e.g. you may be running Personal firewall software or a Secondary router.
ADSL Modem - Ethernet
ADSL modem (Transparent Bridge) - This is when you plug the modem directly into the Ethernet port of a computer and then run Internet connection software (often supplied by your ISP) on the computer to establish a connection to the Internet. This method means that the computer connected to the Ethernet port of the NB1300Plus4 is exposed to the Internet and is given a public IP address.
Rev. 1 - YML674 | www.netcomm.com.au |
NB1300Plus4 ADSL Modem | Page 13 |
