Reference Manual for the ADSL Modem Router DG834 v3

B-14 NETGEAR VPN Configuration

v1.1, October 2006
Configuration Summary (Telecommuter Example)

The configuration in this document follows the addressing and configuration mechanics defined

by the VPN Consortium. Gather all the necessary information before you begin the configuration

process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and

all of the parameters that need to be set on both sides. Assure that there are no firewall restrictions.

Table B-1. Configuration summary (telecommuter example)

VPN Consortium Scenario: Scenario 1
Type of VPN: PC/client-to-gateway, with client behind NAT router
Security Scheme: IKE with Preshared Secret/Key (not Certificate-based)
IP Addressing:
Gateway Fully Qualified Domain Name (FQDN)
Client Dynamic

Figure B-12

Gateway A
ntgr.dyndns.org
192.168.0.1/24
192.168.0.1
WAN IP WA N IPLAN IPClient B
FQDN 0.0.0.0
Router
(atemployer's
mainoffice)
TelecommuterExample
NATRouter B
Router
(attelecommuter's
homeoffice)
PC
(runningNETGEAR
ProSafeVPN Client)
192.168.2.3
"fromDG834G.com" "toDG834G.com"