NETGEAR DG834 V3 Setting Up the Client-to-Gateway VPN Configuration (Telecommuter Example)

Reference Manual for the ADSL Modem Router DG834 v3
NETGEAR VPN Configuration B-15
v1.1, October 2006
Setting Up the Client-to-Gateway VPN Configuration
(Telecommuter Example)
Setting up a VPN between a remote PC running the NETGEAR ProSafe VPN Client and a
network gateway involves the following two steps:
•Step 1: Configuring the Client-to-Gateway VPN Tunnel on the VPN Router at the Employer’s
Main Office.
•Step 2: Configuring the NETGEAR ProSafe VPN Client on the Remote PC at the
Telecommuter’s Home Office configures the NETGEAR ProSafe VPN Client endpoint.
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the
VPN Router at the Employer’s Main Office
Follow this procedure to configure a client-to-gateway VPN tunnel by filling out the VPN Auto
Policy screen.
1. Log in to the VPN router at its LAN address of http://192.168.0.1 with its default user name of
admin and password of password. Click the VPN Policies link in the main menu to display
the VPN Policies screen. Click Add Auto Policy to proceed and enter the information.