Reference Manual for the ADSL Modem Router DG834 v3

c.Click Show Status. The resulting screen should show Update OK: good (see Figure B-10).

Figure B-10

5. Configure the DG834 v3 as in the Gateway-to-Gateway procedures using the VPN Wizard (see “How to Set Up a Gateway-to-Gateway VPN Configuration” on page 6-20), being certain to use appropriate network addresses for the environment.

The LAN Addresses used in this example are as follows:

Device

LAN IP Address

LAN Subnet Address

 

 

 

DG834 v3

10.5.6.1

255.255.255.0

 

 

 

FVL328

172.23.9.1

255.255.255.0

 

 

 

 

a.

In Step 1, enter toFVL328 for the Connection Name.

 

b.

In Step 2, enter fvl328.dyndns.org for the remote WAN's IP address.

a.In Step 3, enter the following:

IP Address = 172.23.9.1

Subnet Mask = 255.255.255.0

6.Configure the FVL328 as in the Gateway-to-Gateway procedures for the VPN Wizard (see “How to Set Up a Gateway-to-Gateway VPN Configuration” on page 6-20), being certain to use appropriate network addresses for the environment.

B-12

NETGEAR VPN Configuration

v1.1, October 2006

Page 148
Image 148
NETGEAR DG834 V3 manual Figure B-10