Reference Manual for the ADSL Modem Router DG834 v3
NETGEAR VPN Configuration B-17
v1.1, October 2006
2. Click Apply when done to get the VPN Policies screen.
To view or modify the tunnel settings, select the radio button next to the tunnel entry and click
Edit.
Step 2: Configuring the NETGEAR ProSafe VPN Client on the Remote PC at the Telecommuter’s Home Office
This procedure describes how to configure the DG834 ADSL Modem Router. We will assume the
PC running the client has a dynamically assigned IP address.
The PC must have a VPN client program installed that supports IPSec (in this case study, the
NETGEAR VPN ProSafe Client is used). Go to the NETGEAR website (http://www.netgear.com)
and select VPN01L_VPN05L in the Product Quick Find drop-down menu for information on
how to purchase the NETGEAR ProSafe VPN Client.
1. Install the NETGEA ProSafe VPN Client on the remote PC and reboot.
a. You may need to insert your Windows CD to complete the installation.
b. If you do not have a modem or dial-up adapter installed in your PC, you may see the
warning message stating “The NETGEAR ProSafe VPN Component requires at least
one dial-up adapter be installed.” You can disregard this message.
Figure B-14
Note: Before installing the DG834 ADSL Modem Router software, be sure to turn off
any virus protection or firewall software you may be running on your PC.