Reference Manual for the ADSL Modem Router DG834 v3
3-14 Protecting Your Network
v1.1, October 2006
2. Select the Schedule link of the Security menu to display menu shown below.
3. Select your Time Zone. This setting will be used for the blocking schedule according to your
local time zone and for time-stamping log entries.
Select the Adjust for daylight savings time check box if your time zone is currently in daylight
savings time.
4. The modem router has a list of NETGEAR NTP servers. If you would prefer to use a particular
NTP server as the primary server, enter its IP address under Use this NTP Server.
5. Click Apply to save your settings.
Figure 3-11
Note: If your region uses Daylight Savings Time, you must manually select Adjust
for Daylight Savings Time on the first day of Daylight Savings Time, and clear
it at the end. Enabling Daylight Savings Time will cause one hour to be added
to the standard time.