Mobile Broadband Wireless-N Router MBRN3000

Table 4. Router Status Fields (Continued)

Field

 

Description

 

 

 

WAN Port

Connection Status

The status of the Internet connection.

 

 

 

 

IP Address

The IP address used by the modem. If no address is shown,

 

 

the router cannot connect to the Internet.

 

 

 

 

Protocol

The protocol for the Internet connection, which is PPP

 

 

(Point-to-Point).

 

 

 

 

IP Subnet Mask

The IP subnet mask used by the router’s USB port.

 

 

 

 

Gateway IP Address

The IP address used by the router.

 

 

 

 

Domain Name

The DNS server IP addresses used by the router. These

 

Server

addresses are usually obtained dynamically from the ISP.

 

 

 

LAN Port

MAC Address

The Ethernet MAC address used by the router’s LAN port.

 

 

 

 

IP Address

The LAN port IP address. The default is 192.168.0.1.

 

 

 

 

DHCP

Off: The router will not assign IP addresses to PCs on the

 

LAN.

 

 

 

 

On: The router assigns IP addresses to PCs on the LAN.

 

 

 

 

IP Subnet Mask

The LAN port IP subnet mask. The default is 255.255.255.0.

 

 

 

Wireless Port

Name (SSID)

The service set ID, also known as the wireless network name.

(See “Manually

 

 

Region

The country where the unit is set up for use.

Configuring Your

Wireless Settings”

Channel

The current channel, which determines the operating

on page 15.

 

frequency.

 

 

 

 

 

 

Wireless AP

Indicates if the access point feature is disabled or not. If not

 

 

enabled, the Wireless LED on the front panel will be off.

 

 

 

 

Broadcast Name

Indicates if the router is configured to broadcast its SSID.

 

 

 

34 Chapter 4: Managing Your Network

Page 35
Image 35
NETGEAR MBRN3000-100NAS user manual Dhcp, Wireless Settings