NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual
4.Select Create with Passphrase and enter the passphrase. The configuration utility will automatically generate the WEP keys.
Note: The characters are case sensitive. Be sure to use the same passphrase for all the wireless devices in the network.
If the passphrase method is not available in the other devices, you must manually enter the keys to match exactly what is in the access point and other 802.11b wireless devices.
5.Save your settings in a Profile.
a.Click Save Profile. All the configuration settings are saved in this profile.
b.Click Apply.
c.Click Close to exit the configuration utility.
Setting up WPA2-PSK Security
Follow the steps below to configure
1.Run the Wireless Adapter Smart Wizard.
a.Make sure the software is installed and the Wireless Adapter is fully inserted in a USB port in your computer.
b.Use the 
icon to open the Smart Wizard. The Settings tab page opens.
Figure 20
2.Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
23
