NETGEAR WG111V2 user manual Setting up WPA-PSK Security

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual

b.In the Network Name (SSID) field select the network, or enter the SSID.

Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point.

c.In the Security section, select WPA2-PSK [AES].

For more information about WPA2-PSK security, see the Web link to “Wireless Communications” on page 35.

3.Save your settings in a Profile.

a.Click the Save Profile button. All the configuration settings are saved in this profile.

b.Click Apply.

c.Click Close to exit the Smart Wizard.

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.

1.Run the Wireless Adapter Smart Wizard.

a.Make sure the software is installed and the Wireless Adapter is fully inserted in a USB port in your computer.

b.Use the icon to open the Smart Wizard. The Settings tab page opens.

Figure 21

2.Configure the Security settings.

a. In the Profile box, select the profile or type in a profile name.

24

v3.0, January 2007