TP-Link TL-R4299G manual Quick Setup, Network, 1 LAN

TL-R4299GDual-WAN SMB Broadband Router User Guide

4.2Quick Setup

Please refer to chapter 3"Quick Installation Guide".

4.3Network

Choose menu “Network”, the next submenus are shown below:

Figure 4-2

Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

4.3.1LAN

Choose menu “Network→LAN”, you can configure the IP parameters of the LAN on the screen below.

Figure 4-3

¾MAC Address - This field displays the physical address of the LAN. The value can't be changed.

¾IP Address - Enter the IP address for the LAN of the Router, the formal is in dotted-decimal notation (the factory default value is 192.168.1.1).

¾Subnet Mask - Enter the subnet mask for the LAN of the Router, this address code determines the size of the network. Normally use 255.255.255.0 as the subnet mask.

)Note:

1)If you change the IP address of the LAN, you must use the new IP address to login to the router.

2)If the new LAN IP Address you set is not in the same subnet, the IP Address pool in the

13