TL-R4299GDual-WAN SMB Broadband Router User Guide

entering that number in the box provided. Choose a number between 1024 and 65534, but do not use the number of any common service port.

¾Remote Management IP Address - This is the current address you will use when accessing your router from the Internet. The default IP address is 0.0.0.0. It means this function is disabled. To enable this function, change the default IP address to another IP address as desired.

)Note:

1)To access the router, you will type your router's WAN IP address into your browser's address (in IE) or Location (in Navigator) box, followed by a colon and the custom port number. For example, if your Router's WAN address is 202.96.12.8, and the port number you use is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be asked for the router's password. After successfully entering the username and password, you will be able to access the router's web-based utility.

2)Be sure to change the router's default password to a very secure password.

4.13.9 Statistics

Choose menu “System ToolsStatistics”, you can view the statistics of the Router. This screen (shown in Figure 4-77) displays the network traffic of each PC on LAN, including total traffic and current traffic of the last “Packets Statistic interval” seconds.

Figure 4-77

¾Current Statistics Status - Enable or Disable the statistics function. The default status is disabled. Click the Enable button to use the function. Click the Disable button to disable the function.

¾Packets Statistics Interval - The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Statistic interval value indicates the time section of the packets statistic.

¾Sort Rules - Select the rule for displaying the traffic information.

72

Page 78
Image 78
TP-Link TL-R4299G manual Statistics