TP-Link TL-R4299G manual To add/modify a static routing entry

TL-R4299G

Dual-WAN SMB Broadband Router User Guide

Figure 4-41

¾Destination IP Address - The “Destination IP Address” is the address of the network or host that you want to assign to a static route.

¾Subnet Mask - The “Subnet Mask” determines which portion of an IP address is the network portion, and which portion is the host portion.

¾Default Gateway - This is the IP address of the gateway device that allows for contact between the router and the network or host.

¾Status - This field displays the status, Enabled means the rule is effective, Disabled means the rule is ineffective.

To add/modify a static routing entry:

Step 1: Click Add New…/Modify shown in Figure 4-41,you will see a new screen shown in Figure 4-42.

Step 2: Enter the appropriate Destination IP Address, Subnet Mask and Default Gateway, and then select the status.

Figure 4-42

Step 3: Click Save to make the entry take effect.

)Note:

If you want to add more than one static route, please go to step 1 to continue.

Other configurations for the entries as shown in Figure 4-31:

51