TL-R4299G
Dual-WAN SMB Broadband Router User Guide
Figure
¾DHCP Server - Enable or disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer.
¾Start IP Address - This field specifies the first address in the IP address pool. The default address is 192.168.1.100.
¾End IP Address - This field specifies the end address in the IP address pool. The default address is 192.168.1.199.
¾Address Lease Time - This is the amount of time in which a network user will be allowed connection to the router with their current dynamic IP address. Enter the amount of time (in minutes), the range of the time is 1 ~ 2880 minutes. The default value is 120 minutes.
¾Default Gateway - Suggest to input the IP address of the LAN port of the router, default value is 192.168.1.1. (Optional)
¾Default Domain - Input the domain name of your network. (Optional)
¾Primary DNS - Input the DNS IP address provided by your ISP. You can consult your ISP for it. (Optional)
¾Secondary DNS - Input the IP address of another DNS server if your ISP provides two DNS servers. (Optional)
)Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as "Obtain an IP Address automatically" mode. This function will take effect until the router reboots.
4.4.2DHCP Clients List
Choose menu “DHCP→DHCP Clients List”, you can view the information about the clients attached to the router in the next screen (shown in Figure
32
