Connecting the Router | TP-Link TL-R4299G manual

TL-R4299GDual-WAN SMB Broadband Router User Guide

¾Operating Humidity: 10%~90%RH, Non-condensing

)Note:

Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

2.4Connecting the Router

Before you install the router, you should connect your PC to the Internet through your broadband service successfully. If there is any problem, please contact with your ISP for help. After that, please install the router according to the following steps. Don't forget to pull out the power plug and keep your hands dry.

1.Power off your PC(s), Cable/DSL modem, and the router.

2.Connect the PC(s) and all Switches/Hubs on your LAN to the LAN Ports on the router, shown in figure 2-3.

3.Connect the DSL/Cable modem to the WAN port on the router, shown in figure 2-3.

4.Connect the AC power adapter to the AC power socket on the router, and the other end into an electrical outlet. The router will start to work automatically.

5.Power on your PC(s) and Cable/DSL modem.

Figure 2-3

4

Image 10

TP-Link TL-R4299G manual Connecting the Router

Contents

TL-R4299G Dual-WAN SMB Broadband Router Copyright & Trademarks FCC Statement Package contents Contents Appendix a Specifications Appendix B FAQ Appendix C Glossary Overview of the Router FeaturesTL-R4299G Front Panel ConventionsPanel Layout LED Descriptions Name Action System Requirements Installation Environment RequirementsRear Panel Connecting the Router Quick Installation Guide Configure PC Dual-WAN SMB Broadband Router User Guide Configure the IP address as shown in -4.After that, click OK Login Is the connection between your PC and the Router correct? Dual-WAN SMB Broadband Router User Guide TL-R4299GDual-WAN SMB Broadband Router User Guide Configuring the Router Status Dual-WAN SMB Broadband Router User Guide Network Quick Setup1 LAN 2 WAN Dynamic IP Dual-WAN SMB Broadband Router User Guide Static IP PPPoE TL-R4299GDual-WAN SMB Broadband Router User Guide Dual-WAN SMB Broadband Router User Guide BigPondCable L2TP Dual-WAN SMB Broadband Router User Guide Pptp Dual-WAN SMB Broadband Router User Guide Network service detection MAC Clone Flow Balance To add a dispatch rule Balance Policy Other configurations for the entries as shown in FigureClick Save Dual-WAN SMB Broadband Router User Guide WAN Port Parameter Dhcp Settings Dhcp Dhcp Clients List Address Reservation To add/modify a reserved IP address Forwarding Virtual Servers To add/modify a virtual server entry Port Triggering To add/modify a port triggering entry 3 DMZ UPnP To assign a computer or server to be a DMZ server Security Firewall IP Filtering To add/modify an IP Address filtering entry TL-R4299GDual-WAN SMB Broadband Router User Guide Domain Filtering To add or modify a Domain Filtering entry MAC Filtering Dual-WAN SMB Broadband Router User Guide Screen ¾ Scan Attack Defence ¾ DoS Attack Defence ¾ Dubious Packet Defence Static Routing ¾ Packet Defence with IP option To add/modify a static routing entry Session Limit Session LimitTo add/modify a session limit entry QoS Session List QoS Rules List QoS SettingsTo add/modify a QoS rule Setting, ARP List Binding Setting10 IP & MAC Binding To add/modify an IP & MAC binding entry To find a specific IP & MAC binding entry ARP List Dynamic DNS To set up for Dyndns DDNS, follow these instructionsDyndns Ddns PeanutHull Ddns To set up for PeanutHull DDNS, follow these instructionsComexe Ddns Switch Setting To set up for Comexe DDNS, follow these instructions Port Statistics Port Mirror Port Rate Control Port Parameter Port Status System Tools Port Vlan To configure the system time manually Time SettingsTo configure the system automatically Factory Defaults Firmware Backup and Restore To back up the Router’s current settings Reboot To restore the Router’s settings Password System Log Remote Management Statistics WAN Speed Detect Dual-WAN SMB Broadband Router User Guide NAT Source Port Settings IP NAT Table General Physical and Environment Appendix B FAQ Want to use Netmeeting, what do I need to do? SaveMethod one Use Virtual Server Method two Use DMZ Host Want to build a WEB Server on the LAN, what should I do? Figure B-6 Appendix C Glossary