TP-Link TL-R4299G manual Configure the IP address as shown in -4.After that, click OK

TL-R4299GDual-WAN SMB Broadband Router User Guide

Step 4: Configure the IP address as shown in Figure 3-4.After that, click OK.

Figure 3-4

)Note:

You can configure the PC to get an IP address manually, select “Obtain an IP address automatically” and “Obtain DNS server address automatically” in the screen above.

Now, you can run the Ping command in the command prompt to verify the network connection. Please click the Start menu on your desktop, select run tab, type cmd in the field, and then type ping 192.168.1.1 on the next screen, and then press Enter.

If the result displayed is similar to the screen below, the connection between your PC and the Router has been established.

Figure 3-5

7