NETGEAR WGR614v7 manual Configuring Windows 95, 98, and Me for TCP/IP Networking

Models: WGR614v7

1 154
Download 154 pages 30.59 Kb
Page 102
Image 102
Configuring Windows 95, 98, and Me for TCP/IP Networking

54 Mbps Wireless Router WGR614v7 Reference Manual

Windows 3.1 does not include a TCP/IP component. You need to purchase a third-party TCP/ IP application package such as NetManage Chameleon.

Macintosh Operating System 7 or later includes the software components for establishing a TCP/IP network.

All versions of UNIX or Linux include TCP/IP components. Follow the instructions provided with your operating system or networking software to install TCP/IP on your computer.

In your IP network, each computer and the router must be assigned a unique IP addresses. Each computer must also have certain other IP configuration information such as a subnet mask (netmask), a domain name server (DNS) address, and a default gateway address. In most cases, you should install TCP/IP so that the computer obtains its specific network configuration information automatically from a DHCP server during bootup. For a detailed explanation of the meaning and purpose of these configuration items, refer to “Appendix B, “Network, Routing, Firewall, and Basics.”

The wireless router is shipped preconfigured as a DHCP server. The router assigns the following TCP/IP configuration information automatically when the PCs are rebooted:

PC or workstation IP addresses—192.168.1.2 through 192.168.1.254

Subnet mask—255.255.255.0

Gateway address (the router)—192.168.1.1

These addresses are part of the IETF-designated private address range for use in private networks.

Configuring Windows 95, 98, and Me for TCP/IP Networking

As part of the PC preparation process, you need to manually install and configure TCP/IP on each networked PC. Before starting, locate your Windows CD; you may need to insert it during the TCP/IP installation process.

Install or Verify Windows Networking Components

To install or verify the necessary components for IP networking:

1.On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2.Double-click the Network icon.

The Network window opens, which displays a list of installed components:

C-4

Preparing Your Network

April 2006

Page 102
Image 102
NETGEAR WGR614v7 Configuring Windows 95, 98, and Me for TCP/IP Networking, Install or Verify Windows Networking Components