NETGEAR WGR614v7 manual Verifying TCP/IP Properties for Windows XP, 2000, and NT4

Models: WGR614v7

1 154
Download 154 pages 30.59 Kb
Page 115
Image 115
•The TCP/IP Properties dialog box now displays.

54 Mbps Wireless Router WGR614v7 Reference Manual

The TCP/IP Properties dialog box now displays.

Click the IP Address tab.

Select the radio button marked Obtain an IP address from a DHCP server.

Click OK. This completes the configuration of TCP/IP in Windows NT.

Restart the PC.

Repeat these steps for each PC with this version of Windows on your network.

Verifying TCP/IP Properties for Windows XP, 2000, and NT4

To check your PC’s TCP/IP configuration:

1.On the Windows taskbar, click the Start button, and then click Run. The Run window opens.

2.Type cmd and then click OK. A command window opens

3.Type ipconfig /all

Your IP Configuration information will be listed, and should match the values below if you are using the default TCP/IP settings that NETGEAR recommends for connecting through a router or gateway:

The IP address is between 192.168.1.2 and 192.168.1.254

The subnet mask is 255.255.255.0

Preparing Your Network

C-17

April 2006

Page 115
Image 115
NETGEAR WGR614v7 Verifying TCP/IP Properties for Windows XP, 2000, and NT4, The TCP/IP Properties dialog box now displays