NETGEAR WGR614v7 manual Router’s Front Panel, Status Light Descriptions

54 Mbps Wireless Router WGR614v7 Reference Manual

The Router’s Front Panel

The front panel of the wireless router contains the status lights described below.

0OWER 4EST 7IRELESS )NTERNETN0ORT ,!.!0ORTT

Figure 2-1: WGR614v7 Front Panel

You can use the status lights to verify connections. Viewed from left to right, the table below describes the lights on the front panel of the router.

Table 2-1.	Status Light Descriptions
Label	Activity	Description
Power	On Amber Blinking	Power is supplied to the router and it is performing its diagnostic test.
	On Green Solid	Power is supplied and the router it has passed its diagnostic test.
	Off	Power is not supplied to the router.
	Solid Amber	The router has failed its diagnostic test.
Test	On	The unit is performing the power on self test diagnostic.
	Off	The unit successfully completed the power on self test diagnostic.
Wireless	On	The Wireless port is initialized and the wireless feature is enabled.
	Off	The wireless feature is turned off or there is a problem.
Internet	On	The Internet port has detected a link with an attached device.
	Blink	Data is being transmitted or received by the Internet port.
LAN	On (Green)	The LAN (local area network) port has detected link with a 100 Mbps
	Blink (Green)	device.
		Data is being transmitted or received at 100 Mbps.
	On (Amber)	The Local port has detected link with a 10 Mbps device.
	Blink (Amber)	Data is being transmitted or received at 10 Mbps.
	Off	No link is detected on this port.
2-6		Introduction

April 2006