NETGEAR WGR614v7 manual Using the LAN IP Setup Options, Setting the MTU Size

Models: WGR614v7

1 154
Download 154 pages 30.59 Kb
Page 61
Image 61
Setting the MTU Size

54 Mbps Wireless Router WGR614v7 Reference Manual

Setting the MTU Size

The normal MTU (Maximum Transmit Unit) value for most Ethernet networks is 1500 Bytes, 1492 Bytes for PPPoE connections, or 1436 for PPTP connections. For some ISPs you may need to reduce the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection.

Any packets sent through the router that are larger than the configured MTU size will be repackaged into smaller packets to meet the MTU requirement. To change the MTU size:

1.Under MTU Size, enter a new size between 64 and 1500.

2.Click Apply to save the new configuration.

Using the LAN IP Setup Options

The second feature category under the Advanced heading is LAN IP Setup. This menu allows configuration of LAN IP services such as DHCP and RIP. From the Main Menu of the browser interface, under Advanced, click on LAN IP Setup to view the LAN IP Setup menu, shown below.

Figure 6-6: LAN IP Setup Menu

Advanced Configuration of the Router

6-9

April 2006

Page 61
Image 61
NETGEAR WGR614v7 manual Using the LAN IP Setup Options, Setting the MTU Size