NETGEAR WGR614v7 manual Selecting Windows’ Internet Access Method, Verifying TCP/IP Properties

54 Mbps Wireless Router WGR614v7 Reference Manual

•By default, the IP Address tab is open on this window.

•Verify the following:

Obtain an IP address automatically is selected. If not selected, click in the radio button to the left of it to select it. This setting is required to enable the DHCP server to automatically assign an IP address.

•Click OK to continue.

Restart the PC.

Repeat these steps for each PC with this version of Windows on your network.

Selecting Windows’ Internet Access Method

1.On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2.Double-click the Internet Options icon.

3.Select “I want to set up my Internet connection manually” or “I want to connect through a Local Area Network” and click Next.

4.Select “I want to connect through a Local Area Network” and click Next.

5.Uncheck all boxes in the LAN Internet Configuration screen and click Next.

6.Proceed to the end of the Wizard.

Verifying TCP/IP Properties

After your PC is configured and has rebooted, you can check the TCP/IP configuration using the utility winipcfg.exe:

1.On the Windows taskbar, click the Start button, and then click Run.

C-8 Preparing Your Network

April 2006