NETGEAR WGR614v7 manual Viewing a List of Attached Devices, Configuration File Management

		54 Mbps Wireless Router WGR614v7 Reference Manual
Table 5-3:	Router Statistics Items (continued)
Item		Description
Rx B/s		The current reception (inbound) bandwidth used on the WAN and LAN ports.
Up Time		The amount of time since the router was last restarted.
Up Time		The time elapsed since this port acquired the link.
Poll Interval		Specifies the intervals at which the statistics are updated in this window. Click on Stop
		to freeze the display.
Set Interval		Enter a time and click the button to set the polling frequency.
Stop		Click the Stop button to freeze the polling information.

Viewing a List of Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the local network. From the Main Menu of the browser interface, under the Maintenance heading, select Attached Devices to view the table, shown below.

Figure 5-4: Attached Devices menu

For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers the devices. To force the router to look for attached devices, click the Refresh button.

Configuration File Management

The configuration settings of the wireless router are stored within the router in a configuration file. This file can be saved (backed up) to a user’s PC, retrieved (restored) from the user’s PC, or cleared to factory default settings.

Maintenance 5-5

April 2006