CENTRIA WNDR4700/WNDR4720

Table 3. Common MTU sizes (Continued)

MTU

Application

 

 

1460

Usable by AOL if you do not have large email attachments..

 

 

1436

Used in PPTP environments or with VPN.

 

 

1400

Maximum size for AOL DSL.

 

 

576

Typical value to connect to dial-up ISPs.

 

 

To change the MTU size:

1.Select Advanced > Setup > WAN Setup.

2.In the MTU Size field, enter a value from 64 to 1500.

3.Click Apply to save the settings.

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host Configuration Protocol (DHCP) and Routing Information Protocol (RIP).

The router is shipped preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The router’s default LAN IP configuration is:

LAN IP address. 192.168.1.1

Subnet mask. 255.255.255.0

These addresses are part of the designated private address range for use in private networks and are suitable for most applications. If your network requires a different IP addressing scheme, you can change these settings in the LAN Setup screen.

To change the LAN settings:

Note: If you change the LAN IP address of the router, you are disconnected. To use the router menus, you must use a browser to connect to the new IP address and log in again.

NETGEAR genie Advanced Home

45

Page 45
Image 45
NETGEAR WNDR4720 LAN Setup,  To change the MTU size Select Advanced Setup WAN Setup,  To change the LAN settings