![](/images/new-backgrounds/1180350/180350207x1.webp)
9-20 User’s Reference Guide
Binding Map Lists and Server Lists
Once you have created your map lists and server lists, for most Netopia Router models you must bind them to a profile, either a Connection Profile or the Default Profile. You do this in one of the following screens:
■the IP profile parameters screen (see below) of the Connection Profile configuration menu
■the IP Parameters (WAN Default Profile) screen (see page
■the Binding Map Lists and Server Lists screen (see page
IP profile parameters
To bind a map list to a Connection Profile, from the Main Menu go to the WAN Configuration screen then the Display/Change Connection Profile screen. From the
Main
Menu
WAN
Configuration
Display/Change
Connection Profile
IP Profile
Parameters
The IP Profile Parameters screen appears.
IP Profile Parameters
Address Translation Enabled: | Yes |
IP Addressing... | Unnumbered |
NAT Map List... | |
NAT Server List... | |
Local WAN IP Address: | 206.1.1.6 |
Local WAN IP Mask: | 0.0.0.0 |
Remote IP Address: | 127.0.0.2 |
Remote IP Mask: | 255.255.255.255 |
Filter Set... | Basic Firewall |
Remove Filter Set |
|
RIP Profile Options...
Configure IP requirements for a remote network connection here.