7-8 User’s Reference Guide
IP parameters (default profile) screen
If you are using RFC1483 datalink encapsulation, the IP Parameters (Default Profile) screen allows you to configure various IP parameters for ADSL connections established without an explicitly configured connection profile:
IP Parameters (Default Profile)
Address Translation Enabled: | No |
Filter Set (Firewall)... |
|
Remove Filter Set |
|
Receive RIP: | Both |
Transmit RIP: | Off |
Return/Enter accepts * Tab toggles * ESC cancels.
For an ADSL link, Network Address Translation (NAT) is disabled by default in the Default Profile. You can enable it by toggling to Yes. For details on setting up IP Parameters see “IP Setup” on page
Scheduled connections
Scheduled connections are useful for PPPoE, PPTP, and ATMP connection profiles.
To go to the Scheduled Connections screen, select Scheduled Connections in the WAN Configuration screen.
Main
Menu
WAN
