Network Technologies KEEMUX-Px OSD Command Mode Contd FunctionKeystroke, Scan Mode, Ctrl

NTI KEEMUX Series PS/2 KVM Switch

OSD Command Mode (Cont'd)

Function:Keystroke:

Sets scan time-out on	Ctrl
each port
Selects a specific port	Ctrl
Enters Search Mode and adds a character	A-Z
to search string and selects the CPU’s
	0-9
name that matches best.
Selects the first port on the switch	Home
Selects the last port on the switch	End
Switch to a selected port	Enter
Exit OSD Command Mode	Esc

+ T	-	(0-2)	-	(0-9)	-	(0-9)	(xxx from 002 to 255. ie. t002
		x		x		x	would set the time-out period
							for 2 seconds)

+ P -	x	-	x
	(0-9)		(0-9)	(Pxx would be P01, P02, etc.)

(Type any alphabetical or numeric character)

Note: The user must exit

Command Mode to type to a CPU.

To exit Command Mode, either hold down any touch-switch on the front panel for more than 2 seconds, OR press <ESC>.

The mouse can also be used to control Command Mode. The mouse cursor can be moved to the Scan, Help, and Exit fields where the user can then click on the left mouse button to perform that function. Ports listed on the screen can be selected by moving the cursor onto that port and clicking. Clicking twice on a selected port will switch to that port and exit Command Mode. To change the displayed ports on the screen simply click on the up and down arrows located to the right of the port names displayed.

Figure 10- Press <Ctrl> for more functions

Scan Mode

When in Scan Mode the switch scans to each port with a CPU powered-ON. (The SCAN LED on the front panel will illuminate and remain ON while in Scan Mode.) To enter Scan Mode press <Ctrl> + <S> from Command Mode. The port with the CPU powered-ON remains active while in use. When the switch becomes idle for the configured time-out period (default time-out period is 5 seconds) the switch will connect to the next powered-ON CPU port. See Command Mode section above for configuring the scan time-out period.

NOTE: The keyboard and mouse must remain idle for the full scan time-out period before the switch will connect to the next active port.

13