Inserting Batteries

Replacing Batteries

Turn the camera off and make sure that the power-on lamp has gone out before removing or in- serting batteries.

Read Battery Warnings

Read and follow all warnings and instructions supplied by the battery manufacturer.

Damaged Batteries

The following batteries can not be used:

• Batteries with peeling or damaged insulation. Using batter- ies with damaged insulation could result in leakage, over- heating, or rupture. Note that due to manufacturing defects even new batteries may have faulty insulation.

• Batteries with insulation that covers only the sides of the battery and not the area around the negative terminal.

• Batteries with a flat negative terminal. Do not use such bat- teries even if the insulation adequately covers the area around the negative terminal.

Alkaline Batteries

Performance of alkaline batteries may vary greatly depending on the manufacturer. Choose a reli- able brand.

EN-MH1 Batteries

Using an MH-71 battery charger, charge EN-MH1 batteries before first use. Charge each pair of batteries at the same time — do not charge batteries one at a time or mix batteries with different charges. Note that EN-MH1 batteries may discharge quickly immediately after purchase or after the batteries have been left unused for an extended period. This is normal, and the batteries will retain a charge for longer periods after being used and recharged several times. For more information on charging batteries, see the documentation provided with the MH-71.

Alternative Power Sources

To power the camera continuously for extended periods, use an EH-62B AC adapter (Q113). Do not, under any circumstances, use another make or model of AC adapter. Failure to observe this precaution could result in overheating or in damage to the camera.

First Steps

9

Page 19
Image 19
Nikon 7600 manual Inserting Batteries Replacing Batteries, Read Battery Warnings, Damaged Batteries, Alkaline Batteries