
Use the procedure below to measure the white balance value under the lighting used during shooting.
•Up to 3 measured values can be saved: PRE1, PRE2 and PRE3.
1Place a white or gray reference object under the lighting that will be used during shooting.
2 Use the multi selector JKto |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
select PRE1, PRE2 or PRE3. |
|
|
|
|
|
|
|
|
| White balance |
|
|
| ||||
• Items can also be selected by rotating the |
| Preset manual | ||||||
main command dial. |
|
Preset manual 1
3Use Ito select Preset manual and JKto select PRE.
•The lens extends to the zoom position for measurement.
•To apply the last measured value, select f.
White balance
Preset manual
Cancel
Reference
4Frame the white or gray reference
object in the measuring window, and press the kbutton to measure the value.
•The shutter is released and measurement is complete. No image is saved.
Measure
Measuring window
Section
B Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting using the flash, set White balance to Auto (normal), Auto (warm lighting) or
Flash.
E37