Nikon P7800, 26427, COOLPIXP7800BK manual 251

Problem	Cause/Solution	A
	• The ambient light is too bright. Move to a darker	10
Monitor is hard	place or use the viewfinder.	99,
	• Adjust the monitor brightness.
to see.
		E75
	• The monitor is dirty. Clean the monitor.	F6
Image in the	Adjust the viewfinder using the diopter adjustment
viewfinder is		10
	control.
difficult to see.
	• If the camera clock has not been set, the “Date not	28, 99,
	set” indicator flashes during shooting and movie	E73
	recording. Images and movies saved before the clock
	is set are dated “00/00/0000 00:00” or “01/01/2013
Date and time of	00:00” respectively. Set the correct time and date
recording are	from the Time zone and date option in the setup
not correct.	menu.
	• The camera clock is not as accurate as ordinary	99,
	watches or clocks. Periodically compare the time of	E73
	the camera clock with that of a more accurate
	timepiece and reset as required.
No information	Shooting and photo information may be hidden. After
	confirming that the Fn2 button setting is set to Show/	11, 101,
displayed in
	hide info, press the w2 button until information is	E92
monitor.			Technical
	menu.	E73
available.
	displayed.
Print date not	Time zone and date has not been set in the setup	28, 99,
			Notes
imprinted on
Date not	• The current shooting mode does not support Print	99,
images even	date.	E77	and
	• A function that restricts the print date is enabled.	77
when Print
	• The date cannot be imprinted on movies.	–	Index
date is enabled.
Screen for
setting time
zone and date is
displayed when	The clock battery is exhausted; all settings were	28, 29
camera is turned	restored to their default values.
on.
Camera settings
reset.

F9