Display

Cause/Solution

A

 

 

 

• There are no images available for a slide

 

 

 

All images are hidden.

show, etc.

–

 

• There are no images that can be displayed on

 

 

the image selection screen for deletion.

 

 

 

 

 

 

 

 

This image cannot be

The image is protected.

E66

 

deleted.

Disable protection.

 

 

 

 

 

 

 

 

 

 

All registered menu items cannot be changed at

 

 

 

 

the current setting.

 

 

 

My Menu can not be

• Some functions cannot be used in

77

 

 

combination with other menu settings.

 

 

 

changed at current

 

 

 

• There is no item that can be set using the

–

 

settings.

 

current shooting mode.

 

 

 

 

 

 

 

 

• Change the menu item to be registered in My

E93

 

 

Menu.

 

 

 

 

 

 

 

 

 

• When the scene mode is Scene auto

40

 

 

 

selector, you can take an image even if the

 

 

 

Raise the flash.

flash is lowered but the flash will not fire.

 

 

 

• When the scene mode is Night portrait or

40, 43

 

 

 

 

 

 

Backlighting with HDR set to Off, you must

 

 

 

 

raise the flash to take an image.

 

 

 

 

 

 

 

 

Speedlight setting

Refer to the documentation provided with your

E59,

Reference

error

A lens error occurred.

E108

Speedlight or wireless Speedlight commander

 

 

to check the settings.

 

 

 

Lens error

Turn the camera off and then on again. If the

26

 

Section

error persists, contact your retailer or Nikon-

 

 

 

 

 

authorized service representative.

 

 

 

 

 

 

 

 

An error occurred while communicating with

 

 

 

 

 

 

 

Communications

the printer.

E20

 

error

Turn the camera off and reconnect the USB

 

 

 

 

 

cable.

 

 

 

 

 

 

 

 

 

An error occurred in the camera’s internal

 

 

 

 

circuitry.

 

 

 

System error

Turn the camera off, remove and reinsert the

26

 

 

battery, and turn the camera on. If the error

 

 

 

 

 

 

 

persists, contact your retailer or Nikon-

 

 

 

 

authorized service representative.

 

 

 

 

 

 

 

 

Failed to acquire GPS

The camera clock is not set correctly.

 

 

 

Change the location or time and determine the

–

 

data.

 

location again.

 

 

 

 

 

 

 

 

 

 

 

 

E101