Accessory Terminal

Press the dbutton Mztab (A13) MAccessory terminal

Set this option when the optional Wireless Remote Controller WR-R10 or GPS unit (E105) is attached to the accessory terminal (A2).

Option

Description

 

 

Power supply

When set to On (default setting), the WR-R10 or GPS unit works.

When the GPS unit is attached, signals from the GPS satellites are used to set the date and time of the

Use GPS to set clock camera's internal clock (only when Power supply is set to On). Check the positioning status before setting the clock.

B Notes About Use GPS to Set Clock

• Date/time adjustment by Use GPS to set clock is set according to the time zone set in Time zone and date (A28, E73) of the setup menu. Check the time zone before setting Use GPS to set clock.

• The date/time set using Use GPS to set clock is not as accurate as radio clocks.

Use Time zone and date in the setup menu to set the time if it is not accurate in

Use GPS to set clock.Reference Section

E95