Error Messages

Refer to the table below if an error message is displayed.

Display

Cause/Solution

A

 

 

Battery temperature

The camera turns off automatically. Wait until

 

 

high

the battery has cooled before resuming use.

 

 

 

 

 

 

 

 

 

The camera will turn

The inside of the camera has become hot.

 

 

 

off to prevent

The camera turns off automatically. Wait until

 

overheating.

the camera has cooled before resuming use.

 

 

 

 

 

 

 

 

Memory card is write

The write-protect switch is in the “lock” position.

 

 

 

Slide the write-protect switch to the “write”

 

protected.

 

position.

 

 

 

 

 

 

 

 

 

 

 

 

This card cannot be

An error occurred while accessing the memory

 

 

 

used.

card.

 

 

 

 

Use an approved card.

25

 

 

 

 

 

This card cannot be

Check that the terminals are clean.

24

 

 

read.

Confirm that the memory card is correctly

24

 

 

 

inserted.

 

 

 

 

 

 

 

 

 

The memory card has not been formatted for

 

 

 

 

use in the camera.

 

 

 

 

Formatting deletes all data saved on the

 

 

Reference

Card is not formatted.

memory card. If you need to keep copies of any

24, F5

Format card?

images, make sure to select No and save the

 

 

 

 

copies to a computer or other medium before

 

 

 

 

formatting the memory card. Select Yes and

 

 

Section

 

press the kbutton to format the memory card.

 

 

 

 

 

 

 

 

 

 

 

 

The write-protect switch of the Eye-Fi card is in

 

 

the “lock” position.

 

 

 

 

 

 

 

 

 

 

Not available if Eye-Fi

An error occurred while accessing the Eye-Fi

 

 

 

card is locked.

card.

 

 

 

Check that the terminals are clean.

24

 

 

 

 

 

 

Confirm that the Eye-Fi card is correctly

24

 

 

 

inserted.

 

 

 

 

 

 

 

 

 

 

37, 98,

 

 

Out of memory.

Delete images or insert a new memory card.

E65,

 

 

 

24

 

 

 

 

 

 

 

E99