4Aim the transmitter at the infrared

receiver on the front of the camera (A1) and press the transmission button.

• Press the transmission button from a distance of 5 m (16 ft) or less.

• In the quick-response remote mode, once the subject is in focus, the shutter is released.

•When the time for self-timer is set to Z10s

(10 seconds) or Z2s (2 seconds), the self-timer lamp flashes when the subject is in focus, and then about 1 second before the shutter is released, the lamp stops flashing and remains lit. To stop the self-timer before an image is taken, press the transmission button again.

•In the self-timer remote control mode, the remote control mode is set to Z (quick-response remote) when the shutter is released.

Replacing the Battery for Remote Control ML-L3 (3V CR2025 Lithium Battery)

•When changing the remote control battery, make sure that the battery’s positive

(+) and negative (–) terminals are oriented correctly.

•Make sure to read and follow the warnings of “For Your Safety” (Avii).

B Notes About the Remote Control

•The remote control may not function even from a distance of 5 m (16 ft) or less when shooting in backlit conditions.

•The setting may not be changed when using certain settings of other functions.

C More Information

See “Self-timer: After Release“ (E78) for more information.

Section Reference

E107