Using the Flash

You can shoot images with a flash by raising the built-in flash. You can set the flash mode to match the shooting conditions.

1Lower the K(flash pop-up)

control to raise the flash.

• When the flash is lowered, flash operation is disabled and Sis displayed.

2 Press the multi selector H(m).

3Select the desired flash mode

(A60) and press the kbutton.

• When the manual flash is selected, select

 

the flash output and press the kbutton.

 

• If a setting is not applied by pressing the k

 

button within a few seconds, the selection

Auto

will be canceled.

 

B Flash Status Display

The status of the flash can be confirmed with the flash mode icon at the top of the monitor by pressing the shutter-release button halfway.

•On: The flash fires in accordance with the

flash mode when you press the shutter- release button all the way down. When U (auto) is set, the flash fires when Wis displayed.

•Flashing: The flash is charging. The camera cannot shoot images.

•Off: The flash does not fire when an image is taken.

Features Shooting

59