AAutomatic Scene Selection (Scene Auto Selector)

If live view is selected in ior jmode, the camera will automatically analyze the subject and select the appropriate shooting mode when autofocus is enabled. The selected mode is shown in the monitor.

c Portrait

Human portrait subjects

d Landscape

Landscapes and cityscapes

e Close up

Subjects close to the camera

Portrait subjects framed against a dark f Night portrait background

Z Auto

Subjects suited to ior jmode or that do not

bAuto (flash off) fall into the categories listed above

AFlicker

You may notice flicker or banding in the monitor during live view or when shooting movies under certain types of lighting, such as fluorescent or mercury-vapor lamps. Flicker and banding can be reduced by choosing a Flicker reduction option that matches the frequency of the local AC power supply (0 170).

AExposure

xDepending on the scene, exposure may differ from that which would be obtained when live view is not used. Metering in live view is adjusted to suit the live view display, producing photographs with exposure close to what is seen in the monitor. In P, S, A, and %modes, exposure can be adjusted by ±5 EV in increments of 1/3 EV (0 70). Note that the effects of values over +3 EV or under –3 EV can not be previewed in the monitor.

AHDMI

When the camera is attached to an HDMI video device, the camera monitor will turn off and the video device will display the view through the lens as shown at right. If the device supports HDMI-CEC, select Off for the HDMI > Device control option in the setup menu (0 148) before shooting in live view.

104