AF-assist illuminator

DThe AF-Assist Illuminator

If the subject is poorly lit, the AF-assist illuminator will light automatically to assist the autofocus operation when the shutter- release button is pressed halfway. The AF-assist illuminator will not light:

• In live view or during movie recording

• During manual focus or if live view is off and continuous-servo

 

autofocus is selected (AF-Cselected for focus mode, or

 

continuous-servo AF selected in AF-Afocus mode)

 

• If the center focus point is not selected in c(Single-point AF), d(Dynamic-area AF),

 

or f(3D-tracking (11 points)) AF-area mode (0 42, 43)

 

• In shooting modes in which the AF-assist illuminator can not be used (0 216)

 

• If Off has been selected for Custom Setting a2 (Built-inAF-assist illuminator; 0 158)

 

The illuminator has a range of about 0.5–3.0 m (1 ft. 8 in.–9 ft. 10 in.); when using the

 

illuminator, use a lens with a focal length of 18–200 mm and remove the lens hood. The AF-

z

assist illuminator will turn off automatically to protect the lamp after a period of continuous

use. Normal function will resume after a brief pause. Note that the illuminator may become

 

hot when used multiple times in quick succession.

 

ASee Also

For information on focusing in live view, see page 100. For information on using release priority in continuous-servo AF, see Custom Setting a1 (AF-C priority selection, 0 158). Custom Setting d1 (Beep; 0 161) can be used to turn the beep speaker on or off.

41