Connecting the Camera

Connect the camera using the supplied UC-E6 USB cable.

1Turn the camera off.

2Turn the computer on.

Turn the computer on and wait for it to start up.

3Connect the USB cable.

Connect the USB cable as shown. Do not use force or attempt to insert the connectors at an angle.

DUSB Hubs

Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard.

4Turn the camera on.Q5 Transfer photographs.

After following the on-screen instructions to start Nikon Transfer 2, click Start Transfer to transfer photographs (for more information on using Nikon Transfer 2, start ViewNX 2 or Nikon Transfer 2 and select ViewNX 2 Help from the Help menu).

Start Transfer

6Turn the camera off and disconnect the USB cable when transfer ends.

Nikon Transfer 2 will close automatically when transfer is complete.

ACamera Control Pro 2

Camera Control Pro 2 (available separately; 0 206) can be used to control the camera from a computer. When Camera Control Pro 2 is used to capture photographs directly to the computer, a capture mode indicator will be displayed in the viewfinder and information display.

138