Eye-Fi Upload

Gbutton Bsetup menu

This option is displayed only when an Eye-Fi memory card (available separately from third-party suppliers) is inserted in the camera. Choose Enable to upload photographs to a preselected destination. Note that pictures will not be uploaded if signal strength is insufficient.

Observe all local laws concerning wireless devices and choose Disable where wireless devices are prohibited.

When an Eye-Fi card is inserted, its status is indicated by an icon in the information display:

d: Eye-Fi upload disabled.

e: Eye-Fi upload enabled but no pictures available for upload.

f(static): Eye-Fi upload enabled; waiting to begin upload.

f(animated): Eye-Fi upload enabled; uploading data.

g: Error.

DEye-Fi Cards

Eye-Fi cards may emit wireless signals when Disable is selected. If a warning is displayed in the monitor (0 224), turn the camera off and remove the card.

See the manual provided with the Eye-Fi card, and direct any inquiries to the manufacturer. The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions.

ASupported Eye-Fi Cards

As of January 2011, the following cards can be used: 2 GB SD Eye-Fi cards in the Share product category, 4 GB SDHC Eye-Fi cards in the Share Video product category, and 8 GB SDHC card in the Pro X2 product category. Some cards may not be available in some countries or regions; consult the manufacturer for more information. Eye-Fi cards are for use only in the country of purchase. Be sure the Eye-Fi card firmware has been updated to the latest version.

 

Firmware Version

Gbutton Bsetup menu

 

 

 

View the current camera firmware version.

g

175