2Select the first image.

Use the multi selector to highlight the first photograph in the overlay. To view the highlighted photograph full frame, press and hold the X button. Press Jto select the highlighted photograph and return to the preview display.

3Select the second image.

The selected image will appear as Image 1. Highlight Image 2 and press J, then select the second photo as described in Step 2.

4Adjust gain.

Highlight Image 1 or Image 2 and optimize exposure for the overlay by pressing 1 or 3 to select gain from values between 0.1 and 2.0. Repeat for the second image. The default value is 1.0; select 0.5 to halve gain or 2.0 to double it. The effects of gain are visible in the Preview column.

5Preview the overlay.

Press 4 or 2 to place the cursor in the Preview

column and press 1 or 3 to highlight Overlay. Press Jto preview the overlay as shown at right (to save the overlay without displaying a preview, select Save). To return to Step 4 and select new photos or adjust gain, press W.

6Save the overlay.

Press Jwhile the preview is displayed to save

the overlay. After an overlay is created, the resulting image will be displayed full-frame in the monitor.

DImage Overlay

The overlay has the same photo info (including date of recording, metering, shutter speed, u aperture, shooting mode, exposure compensation, focal length, and image orientation) and

values for white balance and Picture Control as the photograph selected for Image 1.

182