e: Bracketing/Flash

 

e1: Flash Cntrl for Built-in Flash

Gbutton ACustom Settings menu

 

 

 

Choose the flash mode for the built-in flash in P, S, A, and M modes.

 

 

 

 

 

Option

 

Description

 

1TTL

Flash output is adjusted automatically in response to shooting conditions.

 

2 Manual

Choose a flash level between Full and 1/32 (1/32 of full power). At full power,

 

 

the built-in flash has a Guide Number of 13/43 (m/ft., ISO 100, 20 °C/68 °F).

AManual

A Yicon blinks in the viewfinder and information display when

Manual is selected and the flash is raised.

AThe SB-400

When an optional SB-400 flash unit (0 202) is attached and turned on, Flash cntrl for built-in flash changes to Optional flash, allowing the flash control mode for the SB-400 to be selected from TTL and Manual.

AFlash Control

The following types of flash control are supported when a CPU lens is used in combination with the built-in flash or optional SB-900, SB-800, SB-700, SB-600, and SB-400 flash units.

i-TTL Balanced Fill-Flash for Digital SLR: Information from the 420-pixel RGB sensor is used to adjust flash output for a natural balance between the main subject and the background.

Standard i-TTLFill-Flash for Digital SLR: Flash output is adjusted for the main subject; the brightness of the background is not taken into account. Recommended for shots in which

the main subject is emphasized at the expense of background details, or when exposure L compensation is used.

Standard i-TTL flash control is used with spot metering or when selected with the optional flash unit. i-TTL balanced fill-flash for digital SLR is used in all other cases.

164