Indicator

 

 

 

 

 

Monitor

Viewfinder

 

 

Solution

0

Not available if Eye-Fi card is

(/k

Eye-Fi card is locked (write protected). Slide card

21

locked.

(blinks)

write-protect switch to “write” position.

 

 

 

 

 

This card is not formatted.

T

Format card or turn camera off and insert new

22

Format the card.

(blinks)

memory card.

 

 

 

 

 

 

j/A/s

Reduce quality or size.

47, 49

Card is full

Delete photographs.

133

 

(blinks)

Insert new memory card.

21

 

 

 

 

Camera can not focus using autofocus. Change

27,

(blinks)

composition or focus manually.

40, 45

 

 

 

 

 

 

 

Use a lower ISO sensitivity.

54

 

 

Use commercial ND filter.

Subject is too bright

 

In mode:

 

 

 

S

Increase shutter speed

63

 

 

 

 

s

 

A Choose a smaller aperture (larger f-number)

64

 

 

% Choose another shooting mode

116

 

(blinks)

 

 

Use a higher ISO sensitivity.

54

 

 

 

 

Use flash.

50

Subject is too dark

 

In mode:

 

 

 

 

S

Lower shutter speed

63

 

 

 

A Choose a larger aperture (smaller f-number)

64

 

 

 

 

No Bulb in S mode

A

Change shutter speed or select manual exposure

63, 65

 

(blinks)

mode.

 

No Bulb in HDR mode

A

Change shutter speed.

65, 76

 

(blinks)

 

 

 

 

 

 

Menus and playback are not available while

 

Interval timer shooting

interval timer photography is in progress. Turn

57

 

 

camera off.

 

 

 

 

 

 

 

Flash has fired at full power. Check photo in

 

 

monitor; if underexposed, adjust settings and try

53

 

N

again.

 

Flash is in TTL mode. Choose

(blinks)

Change flash mode setting on optional flash unit

197,

another setting or use a CPU

 

or use CPU lens.

199

lens.

 

 

 

 

 

 

 

 

 

 

 

 

 

Use the flash.

50

 

 

Change distance to subject, aperture, flash

53,

 

 

 

range, or ISO sensitivity.

54, 64

 

 

Lens focal length is less than 18 mm: use a

N/s￿

 

longer focal length.

 

(blinks)

Optional SB-400 flash unit attached: flash is in

 

 

 

 

bounce position or focus distance is very short.

 

 

 

 

Continue shooting; if necessary, increase focus

 

 

 

 

distance to prevent shadows from appearing in

 

 

 

 

photograph.

 

 

 

 

 

 

 

n

225