Nikon D610 ❚❚“Clean at Startup/Shutdown”, 2Select an option, 1Select Clean at startup/shutdown

❚❚“Clean at Startup/Shutdown”

Choose from the following options:

Option	Description
5 Clean at startup	The image sensor is automatically cleaned each time the camera is
	turned on.
Clean at	The image sensor is automatically cleaned during shutdown each time
6 shutdown	the camera is turned off.

7Cleanatstartup & The image sensor is cleaned automatically at startup and at shutdown. shutdown

Cleaning off Automatic image sensor cleaning off.

1Select Clean at startup/shutdown.

Display the Clean image sensor menu as described in Step 2 on the previous page. Highlight Clean at startup/shutdown and press 2.

2Select an option.

Highlight an option and press J.

DImage Sensor Cleaning

Using camera controls during startup interrupts image sensor cleaning. Image sensor cleaning may not be performed at startup if the flash is charging.

Cleaning is performed by vibrating the low-pass filter. If dust can not be fully removed using the options in the Clean image sensor menu, clean the image sensor manually (0 303) or consult a Nikon-authorized service representative.

If image sensor cleaning is performed several times in succession, image sensor cleaning n may be temporarily disabled to protect the camera’s internal circuitry. Cleaning can be

performed again after a short wait.

302